Vaporesso ARMOUR ULTRA 100W Kit 5500mAh in Dubai UAE
The Vaporesso ARMOUR ULTRA 100W Kit is a rugged DTL vape system built for users who want high output without carrying separate external batteries. It combines a massive 5500mAh built-in battery, adjustable 5–100W power, AXON Chip, 0.96-inch TFT screen, 6ml iTank T, GTi Dual Mesh coils, top airflow, and fast USB-C charging in a compact ARMOUR-series body.
The Global kit includes a GTi 0.2Ω Dual Mesh coil pre-installed and a GTi 0.4Ω Dual Mesh coil in the box, giving users two DTL power ranges from the start.
Key Details / Specifications
- Battery: 5500mAh built-in
- Output: 5–100W
- Chipset: AXON Chip
- Display: 0.96-inch TFT
- Charging: USB Type-C
- Charging input: 9V/2A or 5V/3A
- Tank: Vaporesso iTank T
- Tank capacity: 6ml Global / 2ml TPD
- Included coils: GTi 0.2Ω Dual Mesh + GTi 0.4Ω Dual Mesh
- 0.2Ω range: 60–75W
- 0.4Ω range: 50–60W
- Airflow: Adjustable top airflow
- Filling: Slide top fill
- Modes: Boost / Pulse / Eco / TC
- Protection: IP68 + IP69K + MIL-STD-810H on the mod
- Drop certification: 1.2m test
- Vaping style: DTL
- Dimensions: 144.5 × 37.6 × 31mm
- Kit weight: 256g
- Mod weight: Approximately 173g
These specifications are directly listed by Vaporesso for the ARMOUR ULTRA and Global iTank T kit.
Massive 5500mAh Built-In Battery
The ARMOUR ULTRA uses a 5500mAh integrated rechargeable battery rather than a removable 18650 or 21700 cell. Vaporesso compares its usable battery capacity with approximately two 18650 cells while keeping the device smaller than its earlier ARMOUR S platform.
This means users do not need to purchase:
- External batteries
- A separate battery charger
- Battery sleeves
The built-in format also simplifies daily charging.
Vaporesso advertises up to around three days of use under its own laboratory test conditions. Actual runtime depends heavily on wattage, coil resistance, puff duration, frequency of use, and battery condition.
Running the 0.2Ω coil close to 75W will naturally consume battery faster than operating the 0.4Ω coil around 50–55W.
Adjustable 5–100W Output
The ARMOUR ULTRA supports 5W to 100W adjustable output.
This gives enough headroom for the full GTi DTL coil platform, including higher-output resistance options.
The 100W ceiling also separates the ARMOUR ULTRA from lower-powered pod mods.
Lower Output
Better suited to:
- Higher-resistance GTi coils
- Reduced vapour output
- Cooler DTL operation
Higher Output
Better suited to:
- 0.2Ω and 0.15Ω GTi configurations
- Greater vapour production
- More open airflow
- Warmer DTL output
Always follow the wattage range printed on the installed coil.
AXON Chip
The device is powered by Vaporesso’s AXON Chip, which manages power delivery, operating modes, display functions, and protection features.
The ARMOUR ULTRA offers four main modes:
- Boost Mode
- Pulse Mode
- Eco Mode
- TC Mode
Vaporesso states that Boost Mode provides stronger output than Pulse and Eco under its test methodology. These percentages are manufacturer performance claims rather than guaranteed differences for every user.
Boost Mode
Boost Mode is designed for users who want a stronger initial output and greater vapour production.
Vaporesso claims Boost Mode provides:
- 25% stronger performance than Pulse Mode
- 40% more stability than Eco Mode
under Vaporesso laboratory testing.
It is particularly relevant for higher-power DTL setups.
Pulse Mode
Pulse Mode delivers power in a controlled pulsed pattern and is designed around stable output throughout a puff.
It provides a middle ground between Boost and Eco.
Eco Mode
Eco Mode is intended to prioritize battery efficiency.
It may be useful when:
- Remaining charge is lower
- Maximum vapour output is not required
- Longer battery runtime is preferred
TC Mode
The ARMOUR ULTRA also includes temperature-control functionality.
TC should only be used with suitable coil materials and settings.
For the standard included GTi Dual Mesh coils, follow Vaporesso’s recommended wattage operation unless specific packaging indicates temperature-control compatibility.
0.96-Inch TFT Screen
The ARMOUR ULTRA uses a 0.96-inch TFT display.
The screen provides access to operating information such as:
- Wattage
- Resistance
- Battery status
- Selected mode
- Puff information
The interface makes it easier to manage the device than a screen-free high-power kit.
6ML Vaporesso iTank T
The Global kit includes a 6ml iTank T Dual Mesh Version.
A 2ml TPD version is also manufactured.
The iTank T combines:
- Top airflow
- Slide top filling
- GTi coil compatibility
- Replaceable glass
- Tank protection
Vaporesso designed this version specifically around high-output DTL vaping.
Widened Top Airflow
The iTank T uses a widened top-airflow system.
Instead of taking air directly through lower tank openings, airflow enters from the upper section and moves through the tank toward the coil. Vaporesso says this architecture improves airflow smoothness and helps reduce leakage.
The airflow ring is adjustable, allowing users to fine-tune:
- Draw openness
- Vapour volume
- Cooling
- Inhale resistance
This tank is designed primarily for Direct-to-Lung vaping.
Slide Top-Fill System
The iTank T uses a sliding top-fill design.
Vaporesso specifically promotes one-handed filling with this mechanism.
How to Fill the iTank T
- Slide open the top filling section.
- Insert the e-liquid bottle nozzle.
- Fill slowly.
- Avoid overfilling.
- Close the top securely.
- Make sure a new coil is fully saturated before use.
- Begin near the lower end of the coil’s recommended range.
GTi 0.2Ω Dual Mesh Coil
The standard kit comes with the GTi 0.2Ω Dual Mesh Coil pre-installed.
Official operating range:
60–75W
Vaporesso identifies approximately 65W as the best point for the standard GTi 0.2Ω platform.
It is suited to:
- DTL vaping
- Open airflow
- High vapour production
- Lower-strength freebase e-liquid
GTi 0.4Ω Dual Mesh Coil
The kit also includes a GTi 0.4Ω Dual Mesh Coil.
Official range:
50–60W
Vaporesso identifies approximately 55W as the best setting for the GTi 0.4Ω platform.
It offers:
- Lower power than 0.2Ω
- Slightly cooler vapour
- Lower battery demand
- DTL performance
GTi Dual Mesh Technology
The updated GTi Dual Mesh coils use a dual-layer mesh heating structure.
Vaporesso claims this increases heating uniformity and extends coil lifespan by approximately 30% compared with its reference design. This is a laboratory claim and actual coil life depends on liquid sweetness, wattage, airflow, and frequency of use.
Full GTi Coil Compatibility
The iTank T is compatible with the broader GTi coil platform. Vaporesso currently lists:
| GTi Coil | Recommended Range | Best Setting |
|---|---|---|
| 0.15Ω Mesh | 75–90W | 85W |
| 0.2Ω Mesh | 60–75W | 65W |
| 0.4Ω Mesh | 50–60W | 55W |
| 0.5Ω Mesh | 30–40W | 35W |
The standard ARMOUR ULTRA package includes only the 0.2Ω and 0.4Ω Dual Mesh variants.
Best E-Liquid for ARMOUR ULTRA
The ARMOUR ULTRA and GTi platform are designed for DTL vaping.
For that reason, compatible lower-strength freebase e-liquid and higher-VG formulations are generally more appropriate than high-strength nicotine salt intended for small MTL pods.
The exact VG/PG ratio should still follow the e-liquid manufacturer and coil guidance.
Because the included GTi coils operate between 50W and 75W, high nicotine concentration can deliver much more nicotine per puff than low-power pod hardware.
Fast USB-C Charging
Vaporesso officially specifies:
- DC 9V/2A
- or 5V/3A
- USB Type-C
for ARMOUR ULTRA charging.
This is a relatively high charging input for a built-in-battery vape mod.
For charging:
- Keep the port dry.
- Use compatible charging equipment.
- Keep the USB cover open only while charging.
- Place the device on a stable surface.
- Disconnect it when charging is complete.
- Do not charge a physically damaged mod.
IP68 and IP69K Protection
The ARMOUR ULTRA carries both IP68 and IP69K certifications.
Vaporesso states that the mod has been tested for:
- Water resistance
- High-pressure waterjet resistance
- Dust resistance
- High-temperature water resistance
The IP68 test is listed at approximately 1 metre of water for 30+ minutes, while the IP69K certification includes resistance to water at temperatures up to 80°C under standardized testing.
Important Limitation
These rugged certifications apply to the mod only.
They do not mean that the iTank T, coil, mouthpiece, or e-liquid chamber should be submerged or sprayed with high-pressure water. Vaporesso explicitly states that the certifications and tests apply only to the MOD.
MIL-STD-810H Drop Certification
The ARMOUR ULTRA has also passed a MIL-STD-810H 1.2-metre drop test under third-party test conditions.
Vaporesso describes testing from multiple orientations including:
- Front
- Corners
- Different impact angles
This improves physical protection but does not make the device indestructible.
Tank Protector
The kit includes a protective tank structure and spare tank protector.
The metal cage-style design helps shield the tank glass from accidental impacts while retaining visibility of the e-liquid level.
An extra glass tube and extra tank protector are included in the Global package.
Reinforced 510 Connector
The ARMOUR ULTRA uses a reinforced 510 connector, allowing the supplied iTank T to mount directly onto the mod.
The standardized connection also means the mod can work with other appropriately compatible 510-thread tanks, provided resistance and power requirements remain within the device specifications.
Vaporesso ARMOUR ULTRA Colours
Vaporesso currently lists seven official finishes:
- Obsidian Black
- Camo Silver
- Dune Gold
- Emerald Green
- Titanium Silver
- Storm Blue
- Light Pink
UAE stock may not carry every colour simultaneously.
Size and Weight
Official dimensions:
144.5 × 37.6 × 31mm
Official complete kit weight:
256g
Vaporesso separately lists the mod itself at approximately 173g.
Vaporesso claims the ARMOUR ULTRA is approximately 25% smaller and lighter than ARMOUR S under its comparison methodology.
What Comes in the Box?
Global Version
- 1 × Vaporesso ARMOUR ULTRA Battery
- 1 × Vaporesso iTank T 6ml Dual Mesh Version
- 1 × GTi 0.2Ω Dual Mesh Coil, pre-installed
- 1 × GTi 0.4Ω Dual Mesh Coil
- 1 × Type-C Charging Cable
- 1 × Refilling Silicone Plug
- 2 × O-rings
- 1 × Extra Glass Tube
- 1 × Extra Tank Protector
- 1 × User Manual & Warranty Card
TPD Version
The TPD kit uses a 2ml iTank T, while keeping the same 0.2Ω and 0.4Ω coil combination.
ARMOUR ULTRA vs ARMOUR S
| Feature | ARMOUR ULTRA | ARMOUR S |
|---|---|---|
| Battery | 5500mAh built-in | Single external 21700/18650 |
| Max output | 100W | 100W |
| Tank | iTank T | iTank T / version dependent |
| Main advantage | No external battery required | Replaceable battery |
| Rugged design | IP68/IP69K/MIL-STD | Rugged ARMOUR platform |
| Mod weight | ~173g | Larger/heavier configuration |
| Charging | 9V/2A or 5V/3A | Version dependent |
The ARMOUR ULTRA is better suited to users who prefer a large integrated battery, while ARMOUR S is aimed at users who prefer removable cells.
ARMOUR ULTRA vs ARMOUR MAX
ARMOUR MAX is the higher-powered removable-battery model.
| Feature | ARMOUR ULTRA | ARMOUR MAX |
|---|---|---|
| Battery | 5500mAh built-in | Dual external cells |
| Maximum output | 100W | Higher-output platform |
| Main focus | Compact endurance | Maximum removable-battery power |
| External batteries | No | Yes |
| DTL | Yes | Yes |
| GTi coils | Yes | Yes |
The ULTRA prioritizes battery endurance and convenience, while ARMOUR MAX prioritizes higher output and replaceable battery flexibility.
Who Is Vaporesso ARMOUR ULTRA For?
The ARMOUR ULTRA may suit adult users looking for:
- High-power DTL vaping
- 100W output
- Large built-in battery
- No separate external cells
- GTi coil compatibility
- Adjustable airflow
- Large refillable tank
- TFT screen
- Rugged mod protection
- Multiple operating modes
It is less suited to users looking for:
- Small MTL pod vaping
- High-strength nicotine salt use
- A pocket-sized pod device
- Replaceable external batteries
Care and Maintenance
- Prime every new GTi coil before use.
- Stay within the printed coil wattage range.
- Keep the tank above the minimum liquid level.
- Do not vape a dry coil.
- Clean condensation around the 510 connection.
- Keep the Type-C port dry.
- Close the USB cover after charging.
- Replace damaged tank glass.
- Do not rely on the mod’s IP rating to protect the tank.
- Store away from excessive heat.
- Keep e-liquid away from children and pets.
Frequently Asked Questions
What battery does Vaporesso ARMOUR ULTRA use?
It has a 5500mAh built-in rechargeable battery.
Does it need an external 18650 or 21700 battery?
No. The ARMOUR ULTRA uses an integrated 5500mAh battery.
What is the maximum wattage?
The device supports 5–100W output.
What tank comes with the kit?
The Global kit includes the Vaporesso iTank T 6ml Dual Mesh Version.
Which coils are included?
It includes:
- 0.2Ω GTi Dual Mesh
- 0.4Ω GTi Dual Mesh
What wattage should I use for the 0.2Ω coil?
Vaporesso specifies 60–75W, with approximately 65W as the recommended best point for the standard GTi platform.
What wattage should I use for the 0.4Ω coil?
The official range is 50–60W, with approximately 55W listed as best.
Does it support other GTi coils?
Yes. The iTank T supports the wider GTi range including 0.15Ω and 0.5Ω options.
Does it have top airflow?
Yes. The iTank T uses adjustable top airflow.
Is the tank top fill?
Yes. The iTank T uses a sliding top-fill system.
What screen does it use?
It has a 0.96-inch TFT display.
What modes are available?
Vaporesso lists Boost, Pulse, Eco, and TC modes.
Is ARMOUR ULTRA waterproof?
The mod carries IP68 and IP69K certifications. These certifications do not apply to the tank.
Is it drop resistant?
The mod passed Vaporesso’s stated MIL-STD-810H 1.2m drop test.
How fast does it charge?
Vaporesso specifies 9V/2A or 5V/3A Type-C charging.
What is the tank capacity?
The standard Global tank is 6ml, while the TPD version is 2ml.
Buy Vaporesso ARMOUR ULTRA 100W Kit in Dubai UAE
Choose the Vaporesso ARMOUR ULTRA 100W Kit in Dubai UAE if you want a rugged DTL system with a 5500mAh built-in battery, 100W output, 6ml iTank T, GTi Dual Mesh coils, AXON Chip, top airflow, fast Type-C charging, and IP68/IP69K protection on the mod.
Current Dubai listings observed during research are around AED 200–210, although actual selling prices can change according to stock and promotions.
Before ordering, confirm:
- Colour
- Global or TPD version
- 6ml or 2ml tank
- Included Dual Mesh coils
- Package contents
- Package seal
Availability and delivery across Dubai and the wider UAE depend on current retailer stock and delivery terms.
For adults aged 18 and over only. The device and empty tank contain no nicotine. E-liquids used with this product may contain nicotine. Nicotine is an addictive substance. Keep the device, tank, coils, and e-liquid away from children and pets.
