Uwell Caliburn G2 Replacement Coils

Uwell Caliburn G2 Replacement Coils 0.8Ω & 1.2Ω 4PCS in Dubai UAE

The Uwell Caliburn G2 Replacement Coils are replaceable FeCrAl mesh coil heads designed for the CALIBURN G/G2 refillable cartridge platform. Available mainly in 0.8Ω and 1.2Ω Meshed-H options, they allow users to choose between a more open, warmer draw and a tighter lower-output MTL setup without replacing the complete pod.

Current UAE replacement packs are commonly sold with 4 coils of one selected resistance per pack. The coils use a simple press-fit installation and work with several CALIBURN devices that share UWELL’s earlier replaceable G-series coil platform.

Key Details / Specifications

• Resistance options: 0.8Ω / 1.2Ω
• Construction: FeCrAl UN2 Meshed-H
• Pack size: Commonly 4 coils
• Installation: Press fit
• Primary device: CALIBURN G2
• 0.8Ω typical UAE range: 13–18W
• 1.2Ω typical UAE range: 9–13W
• Additional compatible coil: CALIBURN G 1.0Ω
• Vaping style: MTL to looser MTL / restricted draw
• E-liquid: Compatible nicotine salt and suitable freebase
• Pod required: CALIBURN G/G2-compatible refillable cartridge
• Nicotine included: No

UWELL officially identifies the G2 with FeCrAl UN2 Meshed-H 0.8Ω and 1.2Ω coils and states that it also accepts the older 1.0Ω CALIBURN G coil.

Uwell Caliburn G2 0.8Ω Mesh Coil

The 0.8Ω CALIBURN G coil is the lower-resistance option commonly used with the G2 platform.

UWELL identifies it as a:

FeCrAl UN2 Meshed-H 0.8Ω CALIBURN G Coil.

Compared with the 1.2Ω coil, the 0.8Ω version generally provides:

• More vapour
• A warmer output
• A slightly more open draw
• Loose MTL performance
• Greater airflow flexibility

UWELL’s own G2 product material describes the 0.8Ω coil as the option aimed at greater vapour production, while the higher-resistance 1.2Ω version is oriented toward a more restricted setup.

Common 0.8Ω Wattage Range

Current UAE coil listings commonly rate the 0.8Ω version at approximately:

13–18W.

The CALIBURN G2 itself has an official maximum output of 18W, which aligns with this coil’s common upper operating range.

Uwell Caliburn G2 1.2Ω Meshed-H Coil

The 1.2Ω CALIBURN G2 Coil is the higher-resistance option specifically associated with the G2 generation.

UWELL officially identifies it as:

FeCrAl UN2 Meshed-H 1.2Ω CALIBURN G2 Coil.

The 1.2Ω coil is better suited to:

• Tighter MTL vaping
• More restricted airflow
• Lower vapour output
• Lower power
• Compatible nicotine salt e-liquid

UWELL’s G2 launch material specifically positions the 1.2Ω coil toward stronger salt-style liquids compared with the more open 0.8Ω option.

Common 1.2Ω Wattage Range

Current UAE replacement-coil stock commonly rates the 1.2Ω version at:

9–13W.

Starting near the lower end of the recommended range can be useful with a newly installed coil before gradually increasing power if the device allows adjustment.

What About the 1.0Ω Caliburn G Coil?

The 1.0Ω coil is compatible with the CALIBURN G2, but it is important to describe it correctly.

It is an older:

FeCrAl 1.0Ω CALIBURN G Coil

rather than a 1.0Ω G2 Meshed-H coil. UWELL explicitly states that the G2 accepts this earlier G-series coil.

Current UAE listings commonly rate the 1.0Ω version around:

10–15W.

It provides a middle ground between the more open 0.8Ω and tighter 1.2Ω configurations.

Resistance Comparison

Coil	Common Power Range	General Style	Draw
0.8Ω Meshed-H	13–18W	Loose MTL / restricted draw	More open
1.0Ω G Coil	10–15W	MTL	Balanced
1.2Ω Meshed-H	9–13W	Tight MTL	Most restricted

The 0.8Ω and 1.2Ω coils are the primary G2 mesh choices, while 1.0Ω is an older CALIBURN G coil that UWELL continues to list as compatible.

FeCrAl UN2 Meshed-H Construction

Both main G2 resistance options use FeCrAl mesh-style heating elements.

UWELL officially identifies the G2 coil specifications as:

• FeCrAl UN2 Meshed-H 0.8Ω
• FeCrAl UN2 Meshed-H 1.2Ω

The mesh structure provides a larger heating surface than a simple traditional wire configuration and is designed to work with UWELL’s G-series pod platform.

Actual coil performance depends on:

• E-liquid formulation
• Sweetener level
• Power
• Airflow
• Puff duration
• Proper priming

Pro-FOCS Flavor Technology

Devices using these coils are part of UWELL’s Pro-FOCS flavour platform.

UWELL documents Pro-FOCS across compatible devices including the GK2, GZ2, TENET, and other G-series hardware.

The system is designed around controlled heating, airflow, and e-liquid vaporisation.

Actual flavour performance still varies according to the liquid and condition of the coil.

Press-Fit Coil Installation

CALIBURN G/G2 coils use a press-fit replacement design.

Current UAE listings specify press-fit installation, meaning the coil is pushed into the bottom of the compatible refillable cartridge rather than screwed into place.

How to Install a Caliburn G2 Coil

1. Remove the cartridge from the device.
2. Turn the pod upside down.
3. Remove the old coil from the cartridge base.
4. Check the pod and contacts for condensation.
5. Push the new coil firmly into position.
6. Refill the pod with suitable e-liquid.
7. Allow several minutes for the wick to saturate.
8. Reinstall the cartridge.
9. Begin at an appropriate output level.

Correct installation is important because a coil that is not fully seated can contribute to leaking or connection problems.

Always Prime a New Coil

A new coil contains dry cotton and should not be used immediately after installation.

After installing a fresh coil:

1. Fill the pod.
2. Make sure the wick is exposed to e-liquid.
3. Wait several minutes.
4. Begin with shorter puffs.
5. Avoid excessive repeated puffs during the initial use.

Using the coil while the cotton remains dry can damage the wick and create a persistent burnt taste.

Nicotine Salt and Freebase E-Liquid

The G/G2 coil range supports different low-power e-liquid configurations.

0.8Ω

Better matched to:

• Loose MTL
• More vapour
• Compatible nicotine salt
• Compatible lower-strength freebase

1.0Ω

Suitable for:

• Standard MTL
• Compatible nicotine salt
• Moderate vapour output

1.2Ω

Better suited to:

• Tight MTL
• Lower output
• Compatible nicotine salt
• More restricted airflow

The exact e-liquid should also match the wicking requirements of a small low-powered pod coil.

Very thick liquid can wick more slowly than balanced formulations.

Compatible With Uwell Caliburn G2

The CALIBURN G2 is the primary device for this product.

UWELL officially specifies both:

• 0.8Ω Meshed-H
• 1.2Ω Meshed-H

for the 750mAh, maximum-18W G2 system.

The G2 also accepts the separate 1.0Ω CALIBURN G coil.

Compatible With Uwell Caliburn GK2

The CALIBURN GK2 officially accepts all three relevant G-series options:

• 0.8Ω CALIBURN G
• 1.0Ω CALIBURN G
• 1.2Ω CALIBURN G2

UWELL specifically confirms this three-coil compatibility.

Compatible With Caliburn GK2 Vision

The GK2 Vision also officially supports:

• 0.8Ω
• 1.2Ω
• 1.0Ω sold separately

This makes the G/G2 coil family useful for users who still own multiple compatible UWELL devices.

Compatible With Caliburn GZ2

UWELL lists the CALIBURN GZ2 with:

• FeCrAl UN2 Meshed 0.8Ω CALIBURN G Coil
• FeCrAl UN2 Meshed 1.2Ω CALIBURN G2 Coil
• FeCrAl 1.0Ω CALIBURN G Coil

The GZ2 therefore shares the same general replacement-coil family.

Compatible With Caliburn TENET

UWELL’s official TENET specifications list:

• 0.8Ω CALIBURN G Coil
• 1.2Ω CALIBURN G2 Coil
• 1.0Ω CALIBURN G Coil sold separately

Compatible With Caliburn TENET KOKO

The TENET KOKO also uses the same coil family.

UWELL officially specifies:

• 0.8Ω
• 1.2Ω
• 1.0Ω sold separately

Compatible With Caliburn X

The CALIBURN X uses:

• 0.8Ω CALIBURN G Coil
• 1.2Ω CALIBURN G2 Coil
• 1.0Ω CALIBURN G Coil sold separately

Because CALIBURN X offers adjustable power from 5–20W, users can manually match output more closely to the selected coil.

Compatible With Caliburn Explorer

The CALIBURN Explorer officially uses:

• 0.8Ω CALIBURN G coils
• 1.2Ω CALIBURN G2 coils

Its dual-cartridge system can even operate two compatible coils depending on its selected mode.

Compatible With Caliburn & Ironfist L

UWELL also lists both 0.8Ω and 1.2Ω in the CALIBURN & IRONFIST L package, with the 1.0Ω G coil additionally compatible.

KOKO Prime Compatibility

UWELL’s official KOKO Prime documentation confirms:

• 0.8Ω CALIBURN G Meshed-H
• 1.0Ω CALIBURN G

and UWELL’s KOKO Prime Vision page explicitly states that compatible CALIBURN G2 coils can also be used with that platform.

Because older KOKO Prime packages and pod revisions exist, check the exact pod and coil marking before purchase.

Device Compatibility Summary

Official UWELL documentation confirms the G/G2 coil family across devices including:

• CALIBURN G2
• CALIBURN GK2
• CALIBURN GK2 Vision
• CALIBURN GZ2
• CALIBURN TENET
• CALIBURN TENET KOKO
• CALIBURN X
• CALIBURN Explorer
• CALIBURN & IRONFIST L
• Selected KOKO Prime configurations

Always check the resistance supported by the specific device rather than assuming every G-series model supports every historical coil.

Not Compatible With G3 / G4 / G5 GPP Pods

These replaceable coil heads should not be confused with UWELL’s newer CALIBURN GPP platform.

The current GPP system uses integrated-coil cartridges across the G3, G4, and G5 generations.

G/G2 Coil Platform

• Separate replaceable coil
• Reusable empty cartridge
• 0.8Ω / 1.0Ω / 1.2Ω family

GPP Platform

• Coil integrated inside cartridge
• Replace complete pod when coil is depleted
• Newer G3/G4/G5 ecosystem

A GPP replacement pod is not a substitute for a G2 replacement coil.

What Comes in the Pack?

Current UAE listings commonly supply:

4 × coils of the selected resistance

Choose the resistance before ordering.

A normal pack does not contain:

• Pod cartridge
• Device
• E-liquid

Those are separate products.

When Should You Replace the Coil?

Replace the coil when you notice persistent:

• Burnt flavour
• Reduced flavour
• Lower vapour production
• Poor wicking
• Excessive gurgling
• Unstable resistance
• Repeated leaking despite correct pod installation

There is no fixed guaranteed coil lifespan.

How long a coil lasts depends on:

• E-liquid sweetness
• Frequency of vaping
• Puff length
• Resistance
• Power level
• Priming
• Whether the wick is allowed to run dry

Tips for Longer Coil Life

• Prime every new coil.
• Keep enough liquid in the cartridge.
• Do not exceed the recommended wattage.
• Avoid continuous back-to-back long puffs.
• Use suitable e-liquid.
• Keep the pod contacts clean.
• Make sure the coil is fully installed.
• Replace damaged pod seals.

Sweetened e-liquids can leave residue on the heating element more quickly than simpler formulations.

Frequently Asked Questions

Which coils fit the Uwell Caliburn G2?

UWELL officially lists 0.8Ω and 1.2Ω Meshed-H coils and confirms compatibility with the separate 1.0Ω CALIBURN G coil.

What is the 0.8Ω coil made from?

UWELL identifies it as a FeCrAl UN2 Meshed-H 0.8Ω CALIBURN G Coil.

What is the 1.2Ω version?

It is the FeCrAl UN2 Meshed-H 1.2Ω CALIBURN G2 Coil.

What wattage should I use for 0.8Ω?

Current UAE listings commonly specify approximately 13–18W.

What wattage should I use for 1.2Ω?

The common UAE specification is approximately 9–13W.

How many coils are in a pack?

Current UAE packs commonly contain 4 replacement coils of the selected resistance.

Are these integrated into the pod?

No. They are separate replaceable coil heads installed into a compatible refillable cartridge.

Does the 0.8Ω coil work with Caliburn G2?

Yes. UWELL officially lists it as a G2 coil specification.

Does the 1.2Ω coil work with Caliburn G2?

Yes. It is specifically identified as the CALIBURN G2 1.2Ω coil.

Can I use a 1.0Ω coil in G2?

Yes. UWELL states that the G2 accepts the older 1.0Ω CALIBURN G coil.

Does it fit Caliburn GK2?

Yes. UWELL lists 0.8Ω, 1.0Ω, and 1.2Ω compatibility for GK2.

Does it fit Caliburn GZ2?

Yes. UWELL’s GZ2 specifications list the same G/G2 coil family.

Does it fit Caliburn TENET?

Yes. UWELL officially lists 0.8Ω and 1.2Ω coils for TENET, with 1.0Ω supported separately.

Does it fit Caliburn X?

Yes. CALIBURN X officially supports the same three resistance options.

Does it fit Caliburn G3?

No. CALIBURN G3 uses integrated-coil G3 cartridges rather than separate G2 coil heads.

Which resistance is tighter?

The 1.2Ω coil generally provides the tighter, lower-output MTL configuration.

Which resistance produces more vapour?

The 0.8Ω coil is the more open, higher-output option within the main G2 pair. UWELL’s own G2 material positions it for greater vapour than the 1.2Ω version.

Buy Uwell Caliburn G2 Replacement Coils in Dubai UAE

Choose Uwell Caliburn G2 Replacement Coils in Dubai UAE when the existing heating element develops persistent burnt flavour, weak vapour, poor wicking, or otherwise reaches the end of its usable life.

Current UAE packs are commonly available in:

• 0.8Ω Meshed-H
• 1.2Ω Meshed-H
• 4 coils per pack

The 0.8Ω option provides the more open configuration, while the 1.2Ω version is designed for tighter lower-output MTL use.

Before ordering, confirm:

• Coil resistance
• 4PCS pack
• Device compatibility
• Pod compatibility
• Package seal

Availability and delivery across Dubai and the wider UAE depend on current retailer inventory and delivery terms.

For adults aged 18 and over only. These replacement coils contain no nicotine. E-liquids used with compatible pods may contain nicotine. Nicotine is an addictive substance. Keep coils, pods, and e-liquid away from children and pets.