VOOPOO DRAG S2 Pod Kit 60W 2500mAh in Dubai UAE
The VOOPOO DRAG S2 Pod Kit is a powerful refillable pod-mod designed for adult users who want adjustable performance in a compact device. It combines a 2500mAh built-in battery, 5–60W adjustable output, GENE.TT 2.0 chipset, 0.96-inch TFT screen, 5ml PnP X DTL cartridge, top airflow, and replaceable PnP X coils.
For the standard version commonly relevant to UAE stock, the kit includes a PnP X 0.3Ω coil pre-installed and a PnP X 0.2Ω coil as a spare, covering RDL and DTL vaping without requiring a separate coil purchase immediately.
Key Details / Specifications
- Battery: 2500mAh built-in
- Output: 5–60W adjustable
- Chipset: GENE.TT 2.0
- Display: 0.96-inch TFT
- Pod: PnP X Cartridge DTL
- Capacity: 5ml standard / 2ml TPD
- Included coils: 0.3Ω + 0.2Ω PnP X
- Filling: Side fill
- Airflow: Adjustable top airflow
- Modes: Smart / RBA / ECO
- Resistance range: 0.1–3.0Ω
- Output voltage: 3.2–4.2V
- Charging: USB Type-C
- Common UAE charging specification: 5V/2A
- Body: Zinc alloy + leather
- Standard vaping style: RDL to DTL
- Dimensions: Approximately 122 × 31.8 × 28.6mm
- Safety protections: 6 built-in protections
VOOPOO directly confirms the 2500mAh battery, 5–60W output, GENE.TT 2.0 modes, 0.96-inch display, 5ml/2ml pod capacities, and standard 0.2Ω/0.3Ω coil configuration.
2500mAh Built-In Battery
The DRAG S2 is powered by a 2500mAh integrated rechargeable battery.
This is one of the key differences between the DRAG S2 and DRAG X2. The S2 keeps the battery inside the device, so there is no need to buy or install a separate 18650 cell.
Benefits of the built-in design include:
- No external battery required
- Straightforward USB-C charging
- Compact Pod Mod format
- No battery door or cell installation
- Simple everyday setup
Actual battery runtime varies according to wattage, coil resistance, puff duration, airflow, and frequency of use.
A 0.2Ω coil used near 60W will naturally consume battery faster than a 0.6Ω or higher-resistance setup at lower output.
Adjustable 5–60W Power
The VOOPOO DRAG S2 provides 5 to 60 watts of adjustable output.
This wide range allows the device to work with several PnP X coil resistances rather than limiting users to one fixed vaping style.
Lower wattages can be paired with compatible higher-resistance coils for restricted use, while the supplied 0.2Ω and 0.3Ω coils are designed for more open RDL and DTL vaping.
VOOPOO also specifies:
- Output voltage: 3.2–4.2V
- Resistance range: 0.1–3.0Ω
GENE.TT 2.0 Chip
The DRAG S2 uses VOOPOO’s GENE.TT 2.0 chipset.
The chip provides three primary operating modes:
- Smart Mode
- RBA Mode
- ECO Mode
These modes allow the device to move between automatic power guidance, unrestricted manual adjustment within the supported range, and battery-saving operation.
Smart Mode
Smart Mode automatically detects the installed coil and matches it with an appropriate output setting.
VOOPOO describes this mode as automatically identifying the best power for easier everyday operation.
This can be useful when changing between compatible PnP X coils because the user does not need to remember every resistance range manually.
The wattage should still remain within the operating range printed on the installed coil.
RBA Mode
RBA Mode gives the user more direct control over wattage.
VOOPOO specifies a manual range of:
5–60W
in RBA mode.
This is useful for experienced users who want to fine-tune output rather than letting Smart Mode determine the setting automatically.
ECO Mode
ECO Mode is designed to extend battery usage.
VOOPOO claims more than 10% additional usable battery life under its test conditions when ECO mode is used.
That percentage is a manufacturer test claim rather than a guaranteed result for every user.
Real-world improvement depends on the coil, wattage, battery state, and usage pattern.
0.96-Inch TFT Screen
The VOOPOO DRAG S2 has a 0.96-inch TFT display.
The screen presents the main operating information in a clear menu interface.
Depending on the active mode, users can view information such as:
- Wattage
- Coil resistance
- Battery level
- Operating mode
- Puff information
This gives the DRAG S2 more adjustment and monitoring capability than a basic screen-free pod device.
PnP X Atomization Platform
The DRAG S2 was one of VOOPOO’s first devices built around the newer PnP X atomization platform.
PnP X introduced changes to:
- Coil heating
- Cotton structure
- Leak resistance
- Coil compatibility
- Airflow
- Cartridge design
VOOPOO describes the PnP X system as using thermo-stable cotton, mesh-distributed heating, and a four-layer leak-resistant structure.
A-Ten Coil Lifespan Technology
VOOPOO markets its PnP X technology under the A-Ten Lifespan concept.
The manufacturer claims that a single PnP X coil can process approximately 100ml of e-liquid under its laboratory testing without significant flavour fading, burning, or leakage.
This should not be interpreted as a guaranteed 100ml lifespan for every coil.
Actual coil life can be significantly affected by:
- Sweetener content
- VG/PG ratio
- Wattage
- Puff length
- Frequency of use
- Correct priming
- Whether the coil is allowed to run dry
4-Layer Leak-Resistant Design
PnP X coils and cartridges use a four-layer leak-resistant structure intended to help control condensation and e-liquid leakage.
The cartridge also draws air from the top rather than relying on a traditional bottom-airflow arrangement.
This architecture is designed to reduce the chance of liquid escaping through the lower section of the pod.
No refillable cartridge can guarantee absolutely zero condensation or leakage, so normal maintenance is still recommended.
5ML PnP X DTL Cartridge
The standard DRAG S2 package includes a:
PnP X Cartridge DTL – 5ml
VOOPOO also produces a 2ml TPD version.
The standard DTL cartridge features:
- 5ml capacity
- Side filling
- Top airflow intake
- Adjustable airflow
- Magnetic connection
- Replaceable PnP X coil
The cartridge is designed to provide more open airflow than the separate MTL version.
Side-Fill System
The PnP X cartridge uses a side-filling port.
How to Fill the VOOPOO DRAG S2
- Remove the cartridge if needed.
- Open the silicone filling plug.
- Insert the e-liquid bottle nozzle.
- Fill the cartridge slowly.
- VOOPOO recommends filling to around two-thirds capacity.
- Close the silicone plug securely.
- If using a new coil, allow it to sit for approximately five minutes.
- Reinstall the cartridge.
- Select an appropriate wattage or use Smart Mode.
VOOPOO specifically recommends allowing the filled cartridge to rest for around five minutes before using a fresh coil.
Adjustable Top Airflow
The PnP X cartridge uses top airflow intake with adjustable airflow control.
VOOPOO includes scale markings to help users adjust the airflow more precisely.
More Open Airflow
Better suited to:
- PnP X 0.2Ω
- PnP X 0.3Ω
- Higher output
- DTL or RDL vaping
More Restricted Airflow
Can be paired with:
- Higher-resistance PnP X coils
- Lower wattage
- RDL or MTL-oriented configurations
Airflow preference remains personal and should be balanced against the installed coil’s recommended power range.
PnP X 0.3Ω Coil
The standard DRAG S2 kit comes with a PnP X 0.3Ω coil pre-installed.
VOOPOO rates this coil at:
32–40W
and classifies it for:
DTL & RDL
The 0.3Ω coil is a useful middle ground for users who want more vapour than an MTL setup without operating at the upper 60W limit of the device.
PnP X 0.2Ω Coil
A PnP X 0.2Ω coil is also included in the standard kit.
Official range:
40–60W
Vaping style:
DTL
This makes it the higher-output option supplied with the standard DRAG S2 package.
At higher wattage it will generally produce more vapour and consume more e-liquid and battery power than the 0.3Ω coil.
PnP X Coil Compatibility
VOOPOO’s current PnP X platform includes the following resistance choices:
| PnP X Coil | Official Range | Style |
|---|---|---|
| 0.15Ω | 60–80W | DTL |
| 0.2Ω | 40–60W | DTL |
| 0.3Ω | 32–40W | DTL / RDL |
| 0.45Ω | 25–32W | RDL |
| 0.6Ω | 18–23W | RDL / MTL |
| 0.8Ω | 12–16W | MTL |
| 1.0Ω | 10–13W | MTL |
The PnP X DTL cartridge is currently described by VOOPOO as compatible with the full PnP X coil family.
Important 0.15Ω Note
The DRAG S2 itself has a maximum output of 60W, while the 0.15Ω PnP X coil is rated at 60–80W.
Therefore, although the current PnP X DTL cartridge accepts the 0.15Ω coil, the DRAG S2 can only operate at the very bottom of that coil’s official power range.
For the DRAG S2 specifically, the supplied 0.2Ω and 0.3Ω coils are better matched to the device’s available power range.
DTL and MTL Cartridge Versions
VOOPOO created two PnP X cartridge styles for the DRAG S2:
PnP X DTL Cartridge
- 5ml / 2ml
- Wide DTL mouthpiece
- Standard DRAG S2 package
- Standard coils: 0.3Ω + 0.2Ω
PnP X MTL Cartridge
- 5ml / 2ml
- Replaceable 510 MTL drip tip
- Standard coils: 0.3Ω + 0.6Ω
- More restricted draw
However, VOOPOO specifically notes that the original MTL DRAG S2 package was intended only for Italy, France, and Germany.
For a Dubai/UAE product page, the DTL version should therefore be the primary kit configuration unless your physical stock clearly shows otherwise.
Best E-Liquid for DRAG S2
For the standard DTL configuration, VOOPOO recommends e-liquid around:
50–70% VG
This makes the standard 0.2Ω and 0.3Ω configuration more appropriate for suitable lower-strength e-liquid and RDL/DTL use than high-strength MTL salt nicotine.
The exact liquid should always match:
- Installed coil
- Wattage
- Desired airflow
- Nicotine concentration
- Manufacturer guidance
Higher-output DTL coils can vaporize significantly more liquid per puff than a small MTL pod, so high nicotine concentrations should not be treated as interchangeable between the two device types.
USB Type-C Charging
The DRAG S2 uses USB Type-C charging. The cable is included in the official kit.
Current UAE listings commonly specify 5V/2A Type-C charging.
For charging:
- Keep the charging port dry.
- Use suitable USB charging equipment.
- Place the device on a stable surface.
- Do not charge a damaged device.
- Disconnect once charging is complete.
The physical package or manual should remain the final authority for input specification if your regional batch differs.
Six Built-In Safety Protections
VOOPOO lists six electronic protection functions for the DRAG S2:
- Overtime Protection
- Short-Circuit Protection
- Overcharge Protection
- Output Over-Current Protection
- Low Battery Protection
- Chip Over-Temperature Protection
These are electronic safeguards and do not remove the need for normal battery and charging care.
Zinc Alloy and Leather Construction
The DRAG S2 body combines:
Zinc alloy + leather
This continues the characteristic DRAG Pod Mod design, with a rigid metal chassis combined with a softer leather-style grip section.
Current independent measurements commonly place the device at approximately:
122 × 31.8 × 28.6mm
VOOPOO DRAG S2 Colours
VOOPOO’s current product page lists a large colour collection, including:
- Retro
- Marsala
- Carbon Fiber
- Classic
- Galaxy Blue
- Pearl White
- Champagne Golden
- Snow Blue
- Checkered Black
- Moss Green
- Spray Black
- Modern Red
- Colorful Silver
- Gray Metal
- Glow Pink
- Sky Blue
The official VOOPOO store currently lists the same broad range.
Only add colours to your Shopify selector that are actually available in UAE inventory.
What Comes in the Box?
Standard / UAE-Relevant DTL Version
VOOPOO officially includes:
- 1 × VOOPOO DRAG S2 Device
- 1 × PnP X Cartridge DTL 5ml
- 1 × PnP X 0.3Ω Coil, pre-installed
- 1 × PnP X 0.2Ω Coil
- 1 × Type-C Charging Cable
- 1 × User Manual
- 1 × PnP X Platform Card
The TPD package uses a 2ml cartridge instead of 5ml.
DRAG S2 vs Original DRAG S
The DRAG S2 is not simply a cosmetic update to the original DRAG S.
The major change is the move to the PnP X platform, along with updated airflow, cartridge architecture, chipset functions, and a larger integrated battery.
DRAG S2 Key Advantages
- 2500mAh battery
- PnP X platform
- Top-airflow cartridge
- 5–60W adjustment
- GENE.TT 2.0
- Smart / RBA / ECO modes
- 0.96-inch TFT
- 5ml standard capacity
The original DRAG S belongs to the older PnP coil platform, so replacement hardware should not automatically be treated as interchangeable with PnP X.
DRAG S2 vs DRAG X2
The DRAG S2 and DRAG X2 share the same generation and PnP X platform, but their battery systems are different.
DRAG S2
- 2500mAh built-in battery
- Maximum 60W
- No external battery required
DRAG X2
- External battery architecture
- Higher maximum output
- Designed for users who prefer replaceable cells
For most users who want a simpler integrated-battery device, the S2 is the more straightforward option.
DRAG S2 vs DRAG S3
The DRAG S3 is now the newer generation, so the S2 should not be advertised as VOOPOO’s latest DRAG S model.
VOOPOO’s current DRAG S3 uses:
- 3000mAh built-in battery
- 5–60W output
- 0.96-inch TFT screen
- PnP X platform
- Capacitive touch activation
- 5V/2A charging
Compared with S2, the newer S3 raises battery capacity from 2500mAh to 3000mAh and adds updated control and unlocking features.
The DRAG S2 remains relevant as the earlier 60W PnP X generation with conventional button controls.
Who Is the VOOPOO DRAG S2 For?
The DRAG S2 may suit existing adult vape users looking for:
- 60W adjustable performance
- Built-in 2500mAh battery
- Refillable 5ml cartridge
- Replaceable coils
- RDL and DTL capability
- Adjustable top airflow
- TFT display
- Smart power detection
- Manual wattage control
- PnP X coil compatibility
It may be less suitable for users who specifically want:
- A tiny MTL-only pod
- Very high-strength salt nicotine with the standard DTL coil setup
- More than 60W output
- A replaceable external battery
- VOOPOO’s newest DRAG S generation
Care and Maintenance
- Prime every new PnP X coil before use.
- Allow a fresh coil approximately five minutes after filling.
- Keep sufficient liquid around the wick openings.
- Stay within the coil’s recommended wattage range.
- Keep the silicone filling plug firmly closed.
- Wipe condensation from the pod and device contacts.
- Keep the USB-C port dry.
- Replace damaged cartridges.
- Do not dismantle the built-in battery.
- Avoid excessive heat and direct sunlight.
- Keep e-liquid away from children and pets.
Frequently Asked Questions
What battery does the VOOPOO DRAG S2 have?
The DRAG S2 has a 2500mAh built-in rechargeable battery.
What is the maximum wattage?
It supports 5–60W adjustable output.
What chipset does it use?
It uses the GENE.TT 2.0 chip.
What modes are available?
The DRAG S2 has Smart, RBA, and ECO modes.
What screen does it have?
It uses a 0.96-inch TFT display.
How much e-liquid does the standard pod hold?
The standard DTL cartridge holds 5ml. The TPD version holds 2ml.
Which coils come with the standard kit?
The standard package includes a 0.3Ω PnP X coil pre-installed and a 0.2Ω PnP X coil as a spare.
What wattage is the 0.3Ω PnP X coil?
VOOPOO rates it at 32–40W for DTL/RDL use.
What wattage is the 0.2Ω PnP X coil?
Its official range is 40–60W for DTL use.
Does DRAG S2 use PnP X coils?
Yes. The S2 was developed around the PnP X atomization platform.
Can I use old PnP coils in the PnP X cartridge?
No. VOOPOO distinguishes the newer PnP X platform from the older PnP system.
Does it have adjustable airflow?
Yes. The PnP X cartridge uses adjustable top airflow with scale markings.
Is it top fill?
No. The standard PnP X cartridge uses side filling.
Is the DRAG S2 rechargeable?
Yes. It uses a built-in rechargeable battery and USB Type-C cable.
Does it need an external battery?
No. The 2500mAh cell is built into the device.
Can DRAG S2 be used for MTL?
VOOPOO developed a separate PnP X MTL cartridge and higher-resistance PnP X coils. However, the dedicated original MTL DRAG S2 package was intended for Italy, France, and Germany.
Is the DRAG S2 the newest version?
No. VOOPOO has since released the DRAG S3, which increases the built-in battery to 3000mAh and introduces newer controls.
Buy VOOPOO DRAG S2 Pod Kit in Dubai UAE
Choose the VOOPOO DRAG S2 Pod Kit in Dubai UAE if you want a refillable Pod Mod combining a 2500mAh built-in battery, adjustable 5–60W output, GENE.TT 2.0 chipset, 0.96-inch TFT screen, 5ml PnP X cartridge, and adjustable top airflow.
The standard UAE-relevant configuration includes:
- 5ml PnP X DTL cartridge
- 0.3Ω PnP X coil pre-installed
- 0.2Ω PnP X spare coil
- USB Type-C cable
Before ordering, confirm:
- Colour
- 5ml standard or 2ml TPD cartridge
- Included coil resistances
- Package contents
- Package seal
Availability and delivery across Dubai, Abu Dhabi and other UAE emirates depend on current retailer inventory and delivery terms.
For adults aged 18 and over only. The device, empty cartridge, and replacement coils contain no nicotine. E-liquids used with this product may contain nicotine. Nicotine is an addictive substance. Keep the device, cartridge, coils, and e-liquid away from children and pets.
