Vaporesso LUXE Q3 Pod Kit 1450mAh 20W in UAE
The Vaporesso LUXE Q3 Pod Kit is a compact refillable device featuring a 1450mAh battery, up to 20W output, adjustable airflow, automatic draw activation, and 2A Type-C fast charging. It uses Vaporesso LUXE Q mesh pods with COREX SMOOTH technology, supporting both Mouth-to-Lung and restricted Direct-to-Lung vaping.
Vaporesso LUXE Q3 Key Details
- Battery capacity: 1450mAh built-in rechargeable battery
- Maximum output: 20W
- Chipset: AXON chipset
- Charging: USB Type-C, 2A
- Global pod capacity: 3ml
- TPD pod capacity: 2ml
- Included pod resistances: 0.6Ω and 0.8Ω mesh pods
- Heating technology: COREX SMOOTH
- Cotton technology: CF 2.0 cotton
- Activation: Automatic draw activation
- Airflow: Adjustable side airflow
- Vaping styles: MTL and restricted DTL
- Battery indicator: Dynamic breathing LED
- Display: No digital screen
- Pod compatibility: Vaporesso LUXE Q pod series
- Global dimensions: 96.85 × 18.4 × 26mm
- Global weight: Approximately 66.2g
- E-liquid included: No
- Nicotine included: No
Vaporesso officially lists a 1450mAh battery, 20W maximum output, 2A Type-C charging, 3ml pod capacity, and included 0.6Ω and 0.8Ω mesh pods for the global edition.
Large 1450mAh Battery
The LUXE Q3 uses a 1450mAh built-in battery, providing considerably more capacity than earlier compact LUXE Q devices. Vaporesso states that the battery offers approximately 45% longer operating time than the LUXE Q2.
The larger battery may benefit users who:
- Vape regularly throughout the day
- Prefer fewer charging interruptions
- Use the warmer 0.6Ω pod
- Want a compact device without accepting a very small battery
- Alternate between MTL and restricted DTL draws
Vaporesso states that the battery can support up to approximately 24 hours of use under its test conditions. Actual battery life depends on pod resistance, puff duration, airflow, vaping frequency, battery age, and charging habits.
Up to 20W Automatic Output
The Vaporesso LUXE Q3 provides up to 20W maximum output through its AXON chipset. The device automatically manages power according to the installed pod, removing the need for manual wattage adjustment.
This automatic system makes the kit straightforward to operate:
- No wattage menu
- No complicated screen
- No separate firing control
- No coil-setting process
- No need to calculate the recommended output manually
The output changes according to the resistance of the installed LUXE Q pod. A 0.6Ω cartridge produces warmer vapour and greater output, while higher-resistance pods provide a tighter, lower-powered draw.
AXON Chipset
The integrated AXON chipset controls the device’s power delivery, draw activation, battery management, charging, and safety protections.
The chipset allows the LUXE Q3 to recognise the installed cartridge and provide suitable automatic output within the device’s 20W limit. Vaporesso identifies AXON as one of the central technologies used in the LUXE Q3.
This system is suitable for users who want consistent performance without navigating menus or selecting operating modes.
COREX SMOOTH Technology
The included LUXE Q cartridges use COREX SMOOTH technology with upgraded CF 2.0 cotton. Vaporesso states that the system optimises the airflow and heating paths to provide a cleaner, more balanced draw.
According to Vaporesso, COREX SMOOTH is designed to deliver:
- More even heating
- Balanced flavour delivery
- Improved e-liquid absorption
- A smoother draw
- Reduced dryness
- Longer cartridge performance
Vaporesso claims the technology can extend pod lifespan and improve smoothness by approximately 30% under its testing conditions. Results will vary according to e-liquid sweetness, VG/PG ratio, nicotine strength, puff frequency, and filling habits.
Included 0.6Ω and 0.8Ω Mesh Pods
The global LUXE Q3 kit includes two refillable cartridges:
- 1 × LUXE Q 0.6Ω Mesh Pod, pre-installed
- 1 × LUXE Q 0.8Ω Mesh Pod, supplied inside the box
Both included global-edition cartridges have a 3ml capacity. TPD versions use 2ml cartridges.
LUXE Q 0.6Ω Mesh Pod
The 0.6Ω cartridge produces warmer vapour and a looser draw than the included 0.8Ω pod.
It may suit users who prefer:
- Restricted Direct-to-Lung vaping
- Loose Mouth-to-Lung draws
- Warmer vapour
- Fuller vapour production
- Lower-nicotine e-liquids
- Stronger flavour intensity
Because the 0.6Ω cartridge produces more vapour per inhale, it generally consumes e-liquid and battery power faster than higher-resistance options.
LUXE Q 0.8Ω Mesh Pod
The 0.8Ω cartridge provides a more controlled Mouth-to-Lung draw with moderate vapour production.
It may suit users who prefer:
- Balanced MTL vaping
- A slightly tighter inhale
- Cooler vapour than the 0.6Ω pod
- Controlled e-liquid consumption
- Nicotine salt or suitable freebase e-liquid
- Everyday use without large vapour clouds
An independent June 2026 review also found the included 0.6Ω pod airier and the 0.8Ω cartridge tighter.
Compatible with the Full LUXE Q Pod Range
Vaporesso states that the LUXE Q3 is compatible with the complete current LUXE Q pod line. This allows users to select different resistances without replacing the battery device.
Compatible pod options officially shown for the LUXE Q3 include:
| Pod resistance | Available capacity | Typical experience |
|---|---|---|
| 0.6Ω Mesh | 2ml or 3ml | Warm, loose MTL or restricted DTL |
| 0.8Ω Mesh | 2ml or 3ml | Balanced everyday MTL |
| 1.0Ω Mesh | 2ml or 3ml | Tighter, lower-output MTL |
| 1.2Ω Mesh | 2ml | Tight and controlled MTL |
Vaporesso identifies the pods as suitable for compatible nicotine salt and freebase e-liquids. The appropriate nicotine strength should be selected according to pod resistance, vapour output, and personal tolerance.
Adjustable Airflow for MTL and RDTL Vaping
A side-mounted airflow slider allows users to adjust the amount of air entering the device.
Tighter Airflow
Closing the airflow produces:
- A more restricted Mouth-to-Lung draw
- More concentrated flavour
- Lower vapour volume
- A cigarette-style inhale
- Better pairing with higher-resistance pods
More Open Airflow
Opening the airflow produces:
- An airier draw
- Cooler vapour
- Greater vapour production
- A restricted Direct-to-Lung experience
- Better pairing with the 0.6Ω pod
The airflow should be adjusted according to the installed cartridge. An independent review found that opening the slider made the draw airier and cooler, while restricting it produced a tighter indirect inhale.
USB-C 2A Fast Charging
The LUXE Q3 supports USB Type-C charging at up to 2A. Vaporesso states that the battery can reach approximately 80% charge in around 20 minutes under suitable charging conditions.
For safer charging:
- Check that the Type-C port is clean and dry.
- Use a compatible USB-C cable and suitable power source.
- Place the device on a stable, heat-resistant surface.
- Do not cover it while charging.
- Avoid leaving it charging unattended.
- Disconnect it when charging is complete.
- Do not charge a leaking, wet, or damaged device.
Charging time can differ according to the power source, cable quality, ambient temperature, battery age, and remaining charge.
Charging Cable Publishing Note
Vaporesso’s official global and TPD packing lists do not include a USB-C charging cable. The kit contains the battery device, two pods, and printed documentation.
Do not advertise a charging cable as included unless your distributor has created a separate bundle or your physical box specifically lists one.
Dynamic Breathing LED Indicator
The LUXE Q3 does not use a digital screen. Instead, a dynamic breathing LED provides basic information about device activity and battery status.
The LED may illuminate during:
- Inhalation
- Charging
- Battery-status checks
- Low-battery warnings
- Device-protection events
The exact light behaviour should be checked in the user manual supplied with the kit.
The screen-free design keeps the device compact and avoids menus, while the LED provides essential battery feedback.
Automatic Draw Activation
The LUXE Q3 is activated by inhaling through the mouthpiece. There is no standard fire button to hold during use.
To use the device:
- Charge the battery if required.
- Fill a compatible LUXE Q pod.
- Allow a new pod to absorb the e-liquid.
- Insert the cartridge securely.
- Adjust the airflow.
- Inhale gently through the mouthpiece.
- Recharge when the LED indicates low battery power.
Automatic draw activation makes the device suitable for users who prefer simple operation without button combinations.
3ml Refillable Pod Capacity
The global LUXE Q3 includes 3ml refillable pods, while regulated TPD editions include 2ml versions.
The transparent pod body allows users to monitor the remaining e-liquid and refill before the internal cotton becomes dry.
Benefits of the visible cartridge include:
- Easier liquid monitoring
- Reduced risk of dry-coil use
- Clearer identification of leaking
- Easier flavour management
- Better awareness of when refilling is required
Current UAE listings commonly identify the regional version as the 3ml configuration, but the physical package should be treated as the final authority.
How to Fill the Vaporesso LUXE Q Pod
The included 3ml cartridges are commonly supplied with a side-filling system.
- Remove the pod from the device.
- Locate the silicone filling plug.
- Lift the plug carefully.
- Insert the e-liquid bottle nozzle into the filling opening.
- Fill slowly without exceeding the pod capacity.
- Keep e-liquid away from the central airflow channel.
- Close the filling plug securely.
- Wipe away any spilled liquid.
- Reinstall the cartridge.
- Allow a new pod to rest before use.
A current UAE listing identifies the included 3ml cartridges as side-fill pods.
Prime a New LUXE Q Pod
The CF 2.0 cotton inside a new cartridge needs time to absorb e-liquid before the coil is activated.
After filling a new pod:
- Leave it upright for approximately five to ten minutes.
- Begin with short, gentle inhales.
- Avoid repeated back-to-back puffs.
- Keep the pod adequately filled.
- Check that the liquid reaches the cotton openings.
Using a dry cartridge can damage the cotton and produce a permanent burnt taste. The integrated coil cannot be replaced separately, so a burnt pod normally needs to be discarded.
Choosing E-Liquid for the LUXE Q3
The LUXE Q3 supports compatible nicotine salt and freebase e-liquids. Vaporesso officially describes the LUXE Q pod range as suitable for both categories.
For the 0.6Ω Pod
The 0.6Ω pod produces more vapour and is usually better matched with lower nicotine strengths.
It may work well with:
- Balanced 50/50 e-liquid
- Suitable 60/40 blends
- Lower-strength nicotine salt
- Lower-strength freebase e-liquid
For the 0.8Ω Pod
The 0.8Ω cartridge provides more controlled output and may be paired with:
- 50/50 nicotine salt e-liquid
- Balanced MTL freebase e-liquid
- Medium-strength liquids suited to compact pods
For 1.0Ω and 1.2Ω Pods
Higher-resistance cartridges provide lower vapour output and tighter MTL draws. They are commonly selected for nicotine salt e-liquid, although the strength must still match personal tolerance.
Avoid very thick, high-VG cloud liquid unless its manufacturer confirms compatibility with compact LUXE Q cartridges.
Premium Compact Design
The global 3ml LUXE Q3 measures approximately 96.85 × 18.4 × 26mm and weighs around 66.2g. The 2ml version is slightly shorter and lighter.
The body combines a compact shape with premium textured panels designed to improve grip and appearance.
Vaporesso offers three exterior texture styles across the colour range, including leather-inspired and refined tactile finishes. The device is designed to remain small enough for everyday carrying while accommodating the larger 1450mAh battery.
Vaporesso LUXE Q3 Colours
The official LUXE Q3 range includes six colour options.
Classic Black
A neutral black finish suited to users who prefer a simple and understated appearance.
Prussian Blue
A deep blue finish with a refined and professional look.
Mocha Brown
A warm brown colour that complements the leather-inspired exterior.
Aegean Green
A muted green finish with a distinctive but balanced appearance.
Rose Pink
A soft pink finish designed for a lighter and more expressive style.
Birkin Red
A rich red finish with a bold premium appearance.
Colour availability in the UAE depends on current distributor and retailer stock.
What Comes in the Box?
Global 3ml Version
- 1 × Vaporesso LUXE Q3 battery device
- 1 × LUXE Q 0.6Ω Mesh Pod, 3ml, pre-installed
- 1 × LUXE Q 0.8Ω Mesh Pod, 3ml, in the box
- 1 × User manual
- 1 × Warranty card
- 1 × Reminder card
TPD 2ml Version
- 1 × Vaporesso LUXE Q3 battery device
- 1 × LUXE Q 0.6Ω Mesh Pod, 2ml, pre-installed
- 1 × LUXE Q 0.8Ω Mesh Pod, 2ml, in the box
- 1 × User manual
- 1 × Warranty card
- 1 × Reminder card
A charging cable is not listed in Vaporesso’s official package contents.
Who Is the Vaporesso LUXE Q3 For?
The LUXE Q3 may suit adult users who:
- Want a compact refillable pod kit
- Prefer automatic draw activation
- Want adjustable airflow
- Use MTL or restricted DTL vaping
- Need a larger 1450mAh battery
- Prefer automatic power adjustment
- Want several compatible pod resistances
- Use nicotine salt or freebase e-liquid
- Prefer an LED instead of a digital screen
- Want a premium leather-style finish
- Do not want to install separate coils
It may not suit users who want high-wattage DTL cloud production, a detailed screen, manual wattage controls, or removable batteries.
Vaporesso LUXE Q3 vs LUXE Q2
| Feature | LUXE Q3 | LUXE Q2 |
|---|---|---|
| Battery | 1450mAh | Smaller battery |
| Battery improvement | 45% longer claimed life | Previous generation |
| Maximum output | Up to 20W | Lower-generation automatic output |
| Charging | Type-C, 2A | Slower charging |
| Fast-charge claim | Around 80% in 20 minutes | Not offered at the same stated rate |
| Airflow | Adjustable | Adjustable |
| Activation | Draw activated | Draw activated |
| Pod compatibility | Full LUXE Q range | LUXE Q range |
| Indicator | Dynamic breathing LED | LED indicator |
| Exterior | Updated premium textures | Previous-generation finish |
Vaporesso specifically states that the LUXE Q3 battery provides 45% longer life than the Q2.
LUXE Q3 vs Disposable Vapes
| Feature | LUXE Q3 Pod Kit | Disposable Vape |
|---|---|---|
| Battery | Rechargeable and reusable | Fixed inside one device |
| E-liquid | Added by the user | Prefilled |
| Cartridge | Replaceable and refillable | Usually built in |
| Flavour choice | Determined by selected e-liquid | Fixed |
| Nicotine strength | Chosen by the user | Predetermined |
| Airflow | Adjustable | Fixed or adjustable |
| Charging | Type-C 2A | Model dependent |
| Coil replacement | Replace complete pod | Replace complete device |
| Long-term use | Reuse battery device | Device discarded after use |
The LUXE Q3 gives users more control over e-liquid, nicotine strength, airflow, and cartridge resistance than a fixed disposable device.
How Long Does a LUXE Q Pod Last?
Pod lifespan depends on:
- E-liquid sweetness
- VG/PG ratio
- Selected resistance
- Puff frequency
- Puff duration
- Airflow position
- Filling habits
- How often the pod is allowed to run low
A cartridge may need replacement when it develops:
- A permanent burnt taste
- Weak flavour
- Reduced vapour
- Persistent leaking
- Continuous gurgling
- Cracks or filling-seal damage
- Darkened liquid around the coil
Because the coil is integrated into the pod, the complete cartridge must be replaced when the coil reaches the end of its usable life.
How to Reduce Leaking
To reduce leaking and condensation:
- Do not overfill the cartridge.
- Keep e-liquid out of the centre airflow channel.
- Close the filling plug securely.
- Keep the device upright where possible.
- Avoid leaving it in a hot vehicle.
- Do not inhale excessively hard.
- Wipe condensation from the contacts.
- Replace cracked or damaged pods.
- Use a suitable e-liquid consistency.
No refillable pod can be guaranteed to remain completely leak-free under every temperature, pressure, and storage condition.
Care and Charging Guidance
- Use compatible LUXE Q cartridges.
- Keep the Type-C port clean and dry.
- Avoid exposing the device to water.
- Do not leave it in direct sunlight.
- Do not store it inside a hot vehicle.
- Do not open or puncture the battery.
- Do not use a damaged charging cable.
- Stop using the device if it becomes unusually hot.
- Remove leaking or cracked pods immediately.
- Keep the kit, pods, and e-liquid away from children and pets.
- Dispose of damaged batteries through an electronic-waste collection service.
Frequently Asked Questions
What battery capacity does the Vaporesso LUXE Q3 have?
The LUXE Q3 contains a 1450mAh built-in rechargeable battery. Vaporesso states that it provides approximately 45% longer battery life than the LUXE Q2.
What is the maximum output?
The device provides up to 20W maximum output. Its AXON chipset automatically manages power according to the installed LUXE Q pod.
What pods are included?
The global kit includes one 3ml 0.6Ω mesh pod installed in the device and one 3ml 0.8Ω mesh pod inside the box. TPD kits contain 2ml versions of the same resistances.
Is the LUXE Q3 compatible with older LUXE Q pods?
Vaporesso states that the LUXE Q3 supports the full current LUXE Q pod range, including 0.6Ω, 0.8Ω, 1.0Ω, and 1.2Ω options in applicable capacities.
Is the Vaporesso LUXE Q3 draw activated?
Yes. Vapour is produced automatically when the user inhales. The device has no standard firing button.
Does the LUXE Q3 have adjustable airflow?
Yes. A side-mounted slider changes the draw from tighter MTL to airier restricted DTL.
Does the LUXE Q3 have a screen?
No. The device uses a dynamic breathing LED for battery and activity feedback instead of a digital display.
How quickly does it charge?
Vaporesso states that 2A charging can bring the battery to approximately 80% in around 20 minutes under suitable conditions.
Is a USB-C cable included?
A charging cable is not listed in Vaporesso’s official global or TPD package contents. Confirm the physical box before advertising one as included.
Does the kit contain e-liquid?
No. The pods are supplied empty. Compatible e-liquid must be purchased separately.
Can the pods be refilled?
Yes. LUXE Q cartridges are refillable, but their mesh coils are integrated. Replace the complete pod when the coil wears out.
Is the LUXE Q3 suitable for nicotine salt?
Yes. Vaporesso identifies the compatible LUXE Q pod range as suitable for nicotine salt and freebase e-liquids. Select the nicotine strength according to the installed pod and personal tolerance.
Buy Vaporesso LUXE Q3 Pod Kit in the UAE
Choose from Classic Black, Prussian Blue, Mocha Brown, Aegean Green, Rose Pink, and Birkin Red, subject to current UAE stock.
Order the Vaporesso LUXE Q3 Pod Kit for delivery in Dubai and across the UAE according to your store’s current delivery terms. Check the colour, pod capacity, package contents, and authenticity information before use.
For adults aged 18 and over only. The kit and empty pods contain no nicotine. E-liquids used with this device may contain nicotine. Nicotine is an addictive substance. Keep the device, pods, and e-liquids away from children and pets.
