OXVA Xlim V3 Replacement Pods

OXVA XLIM V3 Replacement Pods 3ML in Dubai UAE

\nThe OXVA XLIM V3 Replacement Pods are upgraded top-fill cartridges designed for the OXVA XLIM series. Available in 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω resistances, they cover vaping styles from RDL to tight MTL and support compatible nicotine salt and freebase e-liquids. The current standard version holds 3ml, while a 2ml version is also available. \n \nEach pack contains 3 replacement cartridges in the selected resistance. The coil is built directly into the pod, so there is no separate coil to install or replace. \n

Key Details / Specifications

\n

\n
• Capacity: 3ml standard / 2ml version available
\n
• Resistance options: 0.4Ω, 0.6Ω, 0.8Ω, 1.2Ω
\n
• Filling: Top fill
\n
• Coil: Integrated mesh coil
\n
• Pack quantity: 3 pods
\n
• Vaping styles: RDL to MTL
\n
• E-liquid: Nicotine salt and compatible freebase
\n
• Leak protection: Multi-layer leak-resistant design
\n
• Compatibility: Most OXVA XLIM devices
\n
• Not compatible with: OXVA XLIM C
\n
• Coil replacement: Complete pod replacement
\n
• Nicotine included: No
\n

\nOXVA currently lists the XLIM Top Fill Cartridge in both 3ml and 2ml capacities, with all four resistance options available for each format. \n

Upgraded XLIM V3 Top-Fill Design

\nThe V3 cartridge is the upgraded top-fill version of the earlier XLIM V2 cartridge. \n \nOXVA's own store describes it as an updated cartridge designed to improve everyday filling convenience, flavour delivery and leak resistance. \n \nThe biggest practical change is the filling location. \n \nInstead of removing the cartridge and accessing a lower side port, the V3 allows users to open the filling port near the top of the pod. \n \nThis means you can: \n

\n
• Leave the cartridge installed in many XLIM devices while filling
\n
• See the e-liquid level more easily
\n
• Refill more quickly
\n
• Reduce unnecessary pod removal
\n
• Avoid handling the base of the cartridge during every refill
\n

\n

3ML E-Liquid Capacity

\nThe current standard XLIM Top Fill Cartridge has a 3ml capacity. \n \nOXVA also manufactures a 2ml version for markets or users requiring the smaller capacity. \n

3ML Version

\nOfficial dimensions: \n \n24.1 × 13.8 × 36.95mm \n

2ML Version

\nOfficial dimensions: \n \n24.1 × 13.8 × 34.1mm \n \nThe 3ml version provides approximately 50% more e-liquid capacity than the 2ml pod, meaning fewer refills during normal use. OXVA specifically promotes this capacity difference on its current store listing. \n \nFor current UAE inventory, both 2ml and 3ml listings can be found, so match your Shopify specification to the physical package being sold. \n

Four Resistance Options

\nOne of the main advantages of the XLIM V3 cartridge family is the choice of four integrated coil resistances: \n

\n
• 0.4Ω
\n
• 0.6Ω
\n
• 0.8Ω
\n
• 1.2Ω
\n

\nOXVA officially positions these options across RDL and MTL vaping styles. \n

OXVA XLIM V3 0.4Ω Pod

\nRecommended output: 26–30W \nVaping style: RDL \nE-liquid: Compatible freebase and suitable nicotine salt \n \nThe 0.4Ω cartridge is the lowest-resistance V3 option and is designed for the highest output within the standard XLIM pod family. \n \nIt may suit users who prefer: \n

\n
• More open airflow
\n
• Restricted Direct Lung vaping
\n
• Higher vapour production
\n
• Higher wattage
\n
• Lower-strength compatible e-liquid
\n

\nBecause the 0.4Ω pod operates at substantially higher output than the 0.8Ω and 1.2Ω versions, it should be paired with an XLIM device capable of supplying its intended wattage. \n

Important 0.4Ω Compatibility Note

\nThe 0.4Ω cartridge should not automatically be treated as compatible with every older XLIM device. \n \nOXVA's support documentation specifically notes restrictions on older devices and lists the 0.4Ω Top Fill pod for higher-output XLIM devices such as XLIM Pro, XLIM SQ Pro, XLIM SE 2, XLIM GO and XLIM Classic in its legacy compatibility guidance. \n \nNewer models such as XLIM Pro 3 and XLIM 3 Ultra also support current 0.4Ω XLIM cartridges. \n

OXVA XLIM V3 0.6Ω Pod

\nRecommended output: 20–25W \nVaping style: RDL / MTL \nE-liquid: Freebase and compatible nicotine salt \n \nOXVA positions the 0.6Ω pod between RDL and MTL use. \n \nIt provides a useful balance for users who want: \n

\n
• More vapour than 0.8Ω
\n
• More open airflow
\n
• Moderate-to-higher power
\n
• Loose MTL
\n
• Restricted Direct Lung vaping
\n

\nThe 0.6Ω option is one of the most versatile resistance choices in the XLIM cartridge family. \n

OXVA XLIM V3 0.8Ω Pod

\nRecommended output: 12–16W \nVaping style: MTL \nE-liquid: Particularly suited to nicotine salt \n \nOXVA officially recommends the 0.8Ω cartridge for MTL vaping and lists a 12–16W operating range. \n \nIt may suit users who prefer: \n

\n
• Moderate vapour production
\n
• More restricted airflow
\n
• Lower wattage
\n
• Nicotine salt e-liquid
\n
• Traditional MTL use
\n

\nThe 0.8Ω version is a balanced everyday option between the stronger 0.6Ω pod and tighter 1.2Ω cartridge. \n

OXVA XLIM V3 1.2Ω Pod

\nRecommended output: 10–12W \nVaping style: Tight MTL \nE-liquid: Nicotine salt \n \nThe 1.2Ω version has the highest resistance and lowest official wattage range. \n \nIt is better matched to: \n

\n
• Tight Mouth-to-Lung vaping
\n
• Lower-power use
\n
• Reduced vapour output
\n
• More restricted airflow
\n
• Compatible nicotine salt e-liquid
\n

\n

Resistance Comparison

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Resistance	Official Wattage	Style	OXVA E-Liquid Guidance
0.4Ω	26–30W	RDL	Freebase & compatible nic salt
0.6Ω	20–25W	RDL / MTL	Freebase & compatible nic salt
0.8Ω	12–16W	MTL	Nic salt
1.2Ω	10–12W	Tight MTL	Nic salt

\nThese wattage ranges and usage categories come from OXVA's current XLIM cartridge guide. \n

Nicotine Salt and Freebase Compatibility

\nOXVA supports both nicotine salt and pod-compatible freebase e-liquids across the XLIM cartridge platform, but recommends different liquid types according to resistance. \n \nA simple guide is: \n

0.4Ω

\nBetter suited to: \n

\n
• Lower-strength freebase
\n
• Compatible lower-strength nic salt
\n
• Higher-output RDL vaping
\n

\n

0.6Ω

\nSuitable for: \n

\n
• Freebase
\n
• Compatible nic salt
\n
• RDL or loose MTL
\n

\n

0.8Ω

\nWell suited to: \n

\n
• Nicotine salt
\n
• Lower-power MTL
\n

\n

1.2Ω

\nBest matched to: \n

\n
• Nicotine salt
\n
• Tight MTL
\n
• Low-power use
\n

\nThe exact nicotine strength should always be chosen according to device output, coil resistance and the user's existing nicotine use. \n

Built-In Mesh Coil

\nEach XLIM V3 cartridge has its heating coil integrated directly into the pod. \n \nThis means there is no separate replaceable coil to install. \n \nWhen the cartridge reaches the end of its usable life: \n

\n
1. Remove the complete pod.
\n
2. Dispose of it appropriately.
\n
3. Fill a new V3 pod.
\n
4. Allow the new coil to saturate.
\n
5. Insert the new cartridge into the device.
\n

\nThis makes cartridge replacement simpler than open systems that require a separate coil head. \n

Multi-Layer Leak-Resistant Design

\nOXVA's current XLIM cartridge platform uses a five-layer sealing structure designed to reduce leaking during normal use. \n \nThe manufacturer describes testing that includes different: \n

\n
• Puffing behaviours
\n
• E-liquid types
\n
• Environmental conditions
\n

\nThese are manufacturer testing claims rather than guarantees that a pod can never leak. \n \nNormal condensation can still occur, especially after: \n

\n
• Heavy use
\n
• Large temperature changes
\n
• Overfilling
\n
• Leaving a pod unused for long periods
\n
• Using unsuitable e-liquid
\n

\nWiping the pod base and device contacts periodically helps keep the connection clean. \n

Top-Fill System

\nThe V3's top-fill system is one of its main advantages over the earlier V2 cartridge. \n

How to Fill the XLIM V3 Pod

\n

\n
1. Open the silicone top-fill port.
\n
2. Insert the e-liquid bottle nozzle.
\n
3. Fill slowly.
\n
4. Avoid filling into the central airflow path.
\n
5. Leave a small amount of air space.
\n
6. Close the port firmly.
\n
7. Allow a new pod several minutes to absorb the e-liquid.
\n
8. Insert the cartridge into your compatible XLIM device.
\n

\nA used cartridge can normally be vaped shortly after refilling because its cotton is already saturated, but a completely new cartridge should always be given time to prime. \n

Compatible OXVA XLIM Devices

\nOXVA describes the current XLIM Top Fill cartridge as broadly compatible across the XLIM platform. \n \nCurrent and recent compatible devices include models such as: \n

\n
• OXVA XLIM Pro 3
\n
• OXVA XLIM 3 Ultra
\n
• OXVA XLIM Pro 2
\n
• OXVA XLIM Pro 2 DNA
\n
• OXVA XLIM Pro
\n
• OXVA XLIM SQ Pro 2
\n
• OXVA XLIM SQ Pro
\n
• OXVA XLIM GO 2
\n
• OXVA XLIM GO
\n
• OXVA XLIM GO Lite
\n
• OXVA XLIM Classic Edition
\n
• OXVA XLIM SE 2
\n
• Selected older XLIM devices
\n

\nOXVA's current store specifically highlights compatibility with newer models including XLIM Pro 3, XLIM 3 Ultra, XLIM SQ Pro 2, XLIM GO 2 and XLIM GO Lite. \n

Not Compatible With OXVA XLIM C

\nThe standard V3 / XLIM Top Fill cartridge is not compatible with the OXVA XLIM C. \n \nXLIM C uses a different cartridge architecture with separately replaceable XLIM C coils. \n \nDo not purchase V3 pods for an XLIM C device. \n

XLIM V3 Pods With XLIM Pro 2 DNA

\nThe V3 Top Fill cartridge can be used with the OXVA XLIM Pro 2 DNA, but there is an important limitation. \n \nStandard V3 cartridges do not provide the DNA model's: \n

\n
• Anti-Burn function
\n
• Flavor Replay function
\n

\nOXVA reserves those features for compatible XLIM Stainless Steel DNA cartridges. \n \nTherefore: \n \nV3 Top Fill Pod + Pro 2 DNA = normal vaping compatibility \n \nXLIM SS DNA Pod + Pro 2 DNA = Anti-Burn + Flavor Replay compatibility \n \nThis distinction is important when selling replacement cartridges alongside the DNA device. \n

XLIM V3 vs XLIM V2

\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Feature	XLIM V3 / Top Fill	XLIM V2
Fill location	Top fill	Older side-fill design
Integrated coil	Yes	Yes
Resistance options	0.4–1.2Ω	Version dependent
3ml version	Yes	Older inventory varies
2ml version	Yes	Yes
Leak resistance	Improved current design	Previous generation
XLIM compatibility	Broad	Broad

\nOXVA itself describes V3 as the upgraded version of V2 and specifically highlights the new top-fill and improved anti-leak construction. \n

XLIM V3 vs XLIM EZ Pods

\nOXVA now sells both XLIM Top Fill/V3 and the newer XLIM EZ Cartridge. \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n

Feature	XLIM V3	XLIM EZ
Top fill	Yes	Yes
3ml	Yes	Yes
2ml	Yes	Yes
0.4Ω	Yes	Yes
0.6Ω	Yes	Yes
0.8Ω	Yes	Yes
1.2Ω	Yes	Yes
Integrated coil	Yes	Yes
XLIM platform	Yes	Yes

\nThe EZ is a newer cartridge design, while the V3 remains widely available and officially supported across the current XLIM ecosystem. \n

3 Pods Per Pack

\nOXVA's standard package contains: \n \n3 × XLIM Top Fill / V3 cartridges \n \nin the selected resistance and capacity. \n \nFor example: \n

\n
• 3 × 0.4Ω pods
\n
• 3 × 0.6Ω pods
\n
• 3 × 0.8Ω pods
\n
• 3 × 1.2Ω pods
\n

\nA standard pack is normally one resistance rather than a mixed pack. \n

When Should You Replace an XLIM V3 Pod?

\nReplace the complete cartridge when you notice persistent: \n

\n
• Burnt flavour
\n
• Significant loss of flavour
\n
• Reduced vapour
\n
• Poor wicking
\n
• Repeated leaking
\n
• Physical damage to the pod
\n

\nPod life cannot be guaranteed in days or refill counts because it depends heavily on: \n

\n
• E-liquid sweetness
\n
• VG/PG ratio
\n
• Wattage
\n
• Puff length
\n
• Frequency of use
\n
• How low the liquid is allowed to fall
\n

\nSweeter liquids can generally create coil deposits more quickly. \n

How to Extend Pod Life

\nFor better day-to-day maintenance: \n

\n
• Keep e-liquid above the wicking openings.
\n
• Do not exceed the recommended wattage.
\n
• Allow a new cartridge to prime properly.
\n
• Avoid repeated long puffs without breaks.
\n
• Use suitable pod-system e-liquid.
\n
• Keep the fill port closed.
\n
• Wipe condensation from the pod base.
\n
• Replace a damaged cartridge.
\n

\n

Which XLIM V3 Resistance Should You Buy?

\n

Choose 0.4Ω if:

\nYou want the most open RDL option and have a compatible 30W-class XLIM device. \n

Choose 0.6Ω if:

\nYou want a versatile balance between RDL and loose MTL. \n

Choose 0.8Ω if:

\nYou mainly prefer traditional MTL vaping with moderate output. \n

Choose 1.2Ω if:

\nYou prefer a tighter, lower-power MTL draw. \n \nFor many users choosing between the common 0.6Ω and 0.8Ω versions, 0.6Ω prioritises more vapour and openness, while 0.8Ω prioritises a tighter, lower-power MTL experience. \n

Why Choose OXVA XLIM V3 Replacement Pods?

\nMain features include: \n

\n
• 3ml standard capacity
\n
• 2ml version available
\n
• Top-fill design
\n
• Integrated mesh coil
\n
• Four resistance options
\n
• 0.4Ω RDL option
\n
• 0.6Ω RDL/MTL option
\n
• 0.8Ω MTL option
\n
• 1.2Ω tight-MTL option
\n
• Freebase and nicotine salt compatibility
\n
• Multi-layer leak-resistant design
\n
• Broad XLIM-series compatibility
\n
• Three cartridges per pack
\n
• No separate coil installation
\n

\n

Frequently Asked Questions

\n

What is the OXVA XLIM V3 cartridge?

\nIt is OXVA's upgraded top-fill XLIM replacement cartridge, now commonly labelled XLIM Top Fill Cartridge on the manufacturer's current catalogue. \n

How much e-liquid does it hold?

\nOXVA currently produces 3ml and 2ml versions. \n

How many pods are in a pack?

\nThere are 3 cartridges per pack. \n

Which resistances are available?

\nThe available options are 0.4Ω, 0.6Ω, 0.8Ω and 1.2Ω. \n

What wattage should I use with 0.4Ω?

\nOXVA recommends 26–30W. \n

What wattage should I use with 0.6Ω?

\nOXVA recommends 20–25W. \n

What wattage should I use with 0.8Ω?

\nOXVA recommends 12–16W. \n

What wattage should I use with 1.2Ω?

\nOXVA recommends 10–12W. \n

Which pod is best for RDL?

\nThe 0.4Ω pod is the strongest RDL-focused option, while 0.6Ω can cover RDL and looser MTL. \n

Which pod is best for MTL?

\nOXVA positions the 0.8Ω and 1.2Ω cartridges for MTL, with 1.2Ω providing the tighter low-power option. \n

Can I use nicotine salt?

\nYes. OXVA recommends nicotine salt particularly for the 0.8Ω and 1.2Ω cartridges. \n

Can I use freebase e-liquid?

\nYes. OXVA recommends pod-compatible freebase particularly with 0.4Ω and 0.6Ω cartridges. \n

Are XLIM V3 pods top fill?

\nYes. V3 is the upgraded Top Fill Cartridge version. \n

Are the coils replaceable?

\nNo. The coil is built into the pod. Replace the entire cartridge when the coil reaches the end of its usable life. \n

Does XLIM V3 work with XLIM C?

\nNo. OXVA identifies XLIM C as an exception to standard XLIM Top Fill cartridge compatibility. \n

Does XLIM V3 work with XLIM Pro 2 DNA?

\nYes for normal vaping, but standard V3 pods do not support the DNA device's Anti-Burn or Flavor Replay functions. Those require compatible stainless-steel DNA cartridges. \n

Buy OXVA XLIM V3 Replacement Pods in Dubai UAE

\nChoose OXVA XLIM V3 Replacement Pods in Dubai UAE in the resistance that matches your compatible device and preferred vaping style. \n \nAvailable resistance choices include: \n

\n
• 0.4Ω – 26–30W – RDL
\n
• 0.6Ω – 20–25W – RDL/MTL
\n
• 0.8Ω – 12–16W – MTL
\n
• 1.2Ω – 10–12W – Tight MTL
\n

\nCurrent standard OXVA stock is available in 3ml, while 2ml versions also remain part of the official range. Each retail pack contains 3 refillable top-fill cartridges. \n \nBefore ordering, confirm: \n

\n
• Resistance
\n
• 3ml or 2ml capacity
\n
• Device compatibility
\n
• Package seal
\n
• Exact cartridge version
\n

\nAvailability and delivery across Dubai and the wider UAE depend on current store inventory and delivery terms. \n \nFor adults aged 18 and over only. These empty replacement pods contain no nicotine. E-liquids used with them may contain nicotine. Nicotine is an addictive substance. Keep pods and e-liquid away from children and pets.