Buy Vaporesso XROS Replacement Pods 4-Pack in UAE
The Vaporesso XROS Replacement Pods are refillable cartridges made for the Vaporesso XROS pod-system family. Available in 2ml and 3ml capacities with resistance options from 0.4Ω to 1.2Ω, each pod combines an integrated coil, magnetic connection, visible e-liquid chamber, and leak-resistant construction. Each retail pack normally contains four matching pods.
Key Details and Specifications
- Pod capacity: 2ml or 3ml, depending on the selected variant
- Resistance options: 0.4Ω, 0.6Ω, 0.7Ω, 0.8Ω, 1.0Ω, and 1.2Ω
- Pack size: 4 replacement pods
- Coil type: Integrated mesh coil on most current variants
- Filling method: Top-fill or side-fill, depending on the pod generation
- Connection: Magnetic
- Material: PCTG
- Compatibility: Vaporesso XROS series devices
- E-liquid included: No
- Nicotine included: No
Vaporesso currently lists several XROS pod configurations, including 2ml and 3ml versions. The official capacity and resistance combinations differ between variants, so customers should select the exact option required for their device and preferred draw.
Available XROS Pod Options
| Resistance | Common capacity | Official best wattage | Typical draw |
|---|---|---|---|
| 0.4Ω Mesh | 2ml or 3ml | 25W | Airier RDTL or loose MTL |
| 0.6Ω Mesh | 2ml or 3ml | 21W | Loose MTL or restricted DTL |
| 0.7Ω Mesh | Commonly 3ml | Device controlled | Balanced loose MTL |
| 0.8Ω Mesh | 2ml or 3ml | 16W | Balanced MTL |
| 1.0Ω Mesh | Commonly 2ml | 12W | Tighter MTL |
| 1.2Ω | Commonly 2ml | 10W | Tight, low-output MTL |
The official Vaporesso pod page publishes recommended wattages of 25W for 0.4Ω, 21W for 0.6Ω, 16W for 0.8Ω, 12W for 1.0Ω, and 10W for 1.2Ω. The selected XROS device may manage the output automatically or allow manual adjustment within its supported range.
Which Vaporesso XROS Pod Resistance Should You Choose?
Choosing the correct resistance affects airflow, vapour volume, warmth, flavour intensity, e-liquid consumption, and suitable nicotine strength.
0.4Ω XROS Mesh Pod
The 0.4Ω pod is the highest-output option in the standard XROS range. It provides warmer vapour, an airier draw, and greater vapour production than the higher-resistance cartridges.
It is best suited to:
- Modern higher-output XROS devices
- Restricted Direct-to-Lung vaping
- Loose Mouth-to-Lung vaping
- Lower-nicotine e-liquids
- Users who prefer stronger vapour production
- Users who want warmer flavour delivery
Vaporesso lists 25W as the optimal output for this resistance. Although the wider pod family shares the XROS cartridge format, Vaporesso has separately highlighted the 0.4Ω pod for newer and higher-output models. Check the device manual before pairing it with an older XROS battery.
0.6Ω XROS Mesh Pod
The 0.6Ω pod provides a balance between vapour production and everyday e-liquid efficiency. It produces a looser inhale than the 0.8Ω, 1.0Ω, and 1.2Ω options.
It may suit users who prefer:
- Loose MTL or restricted DTL draws
- Warmer vapour
- Fuller flavour
- Moderate cloud production
- Lower or medium nicotine strengths
- A balance between output and pod life
Vaporesso lists 21W as the recommended output for its current 0.6Ω pod. Both 2ml and 3ml versions are available in selected markets.
0.7Ω XROS Mesh Pod
The 0.7Ω pod is commonly supplied as a 3ml side-fill cartridge. It was introduced with selected earlier XROS models and remains available as a replacement option.
It offers:
- A balanced loose MTL draw
- Moderate vapour production
- A middle point between 0.6Ω and 0.8Ω
- Side-filling on commonly stocked versions
- Compatibility with the wider XROS cartridge platform
The exact heating technology and filling layout may vary by batch, so check whether your stock is the original side-fill version or a newer revised cartridge.
0.8Ω XROS Mesh Pod
The 0.8Ω pod is one of the most versatile choices in the XROS range. It provides a balanced MTL draw, moderate warmth, and controlled vapour production.
It may suit users who want:
- A balanced everyday MTL experience
- Moderate e-liquid consumption
- Nicotine salt or suitable freebase e-liquid
- Clear flavour without excessive vapour
- A draw that is neither extremely tight nor very open
Vaporesso recommends approximately 16W for the current 0.8Ω cartridge. Both 2ml and 3ml versions are listed in the official range.
1.0Ω XROS Mesh Pod
The 1.0Ω pod provides a tighter and lower-output MTL draw. It uses less power and generally produces less vapour per inhale than the lower-resistance options.
It may suit users who prefer:
- Tight Mouth-to-Lung vaping
- Cooler vapour
- Controlled e-liquid consumption
- Nicotine salt e-liquids
- A more discreet vapour output
- Lower-powered XROS devices
The official recommended output is approximately 12W. Current versions are commonly supplied with a 2ml capacity.
1.2Ω XROS Pod
The 1.2Ω pod is the tightest, lowest-output option in the standard XROS range. It provides a restricted MTL inhale with smaller vapour production.
It is best suited to:
- Tight MTL users
- Low-power vaping
- Nicotine salt e-liquids
- Adults who prefer a more controlled draw
- Reduced vapour production
- Efficient battery and e-liquid use
Vaporesso lists approximately 10W as the ideal output. The current official version has a 2ml capacity.
Compatible Vaporesso XROS Devices
Vaporesso states that its XROS replacement pods use a shared cartridge platform across the XROS family. Current and previous models include:
- Vaporesso XROS
- XROS 2
- XROS 3
- XROS 3 Mini
- XROS 3 Nano
- XROS 4
- XROS 4 Mini
- XROS 4 Nano
- XROS 5
- XROS 5 Mini
- XROS 5 Nano
- XROS 6
- XROS Mini
- XROS Nano
- XROS Cube
- XROS Pro
- XROS Pro 2
Vaporesso describes newer COREX pods as backward compatible across the XROS family. However, the cartridge fitting and the ideal operating performance are separate considerations. A 0.4Ω cartridge may physically fit an older device but is better matched to an XROS model capable of supporting its higher output.
These pods are not designed for Vaporesso LUXE Q, ECO Nano, ZERO, GTX, Armour, or other non-XROS platforms.
Top-Fill and Side-Fill XROS Pods
Vaporesso XROS cartridges are available with either a top-filling or side-filling design. The filling method depends on the resistance, capacity, and pod generation.
Top-Fill Pods
On a top-fill XROS pod, the mouthpiece is removed to expose the filling port.
Benefits include:
- Filling without removing the pod from the device
- Easy access to the filling opening
- Less handling of the cartridge
- Convenient everyday refilling
- A separate airflow channel that helps prevent liquid entering the centre tube
Current top-fill options commonly include selected 0.4Ω, 0.6Ω, and 0.8Ω cartridges. Other resistances may also be available in revised top-fill versions.
Side-Fill Pods
Side-fill cartridges use a silicone-covered opening positioned on the side of the pod. The cartridge normally needs to be removed from the device before filling.
Side-fill versions commonly include:
- Earlier 0.6Ω pods
- The 3ml 0.7Ω pod
- Earlier 0.8Ω variants
- Selected 1.0Ω and 1.2Ω batches
Do not assume that every resistance has the same filling mechanism. Check the product image and physical package before publishing the variant.
COREX Heating Technology
Vaporesso has released XROS cartridges using different generations of its COREX heating technology. Current product pages reference COREX 2.0 and newer COREX 3.0 versions.
Depending on the selected cartridge and production batch, COREX technology is designed to support:
- Rapid and even heating
- Accurate flavour reproduction
- Consistent vapour production
- Efficient e-liquid use
- Extended coil performance
- Stable operation across repeated refills
Vaporesso describes COREX 3.0 as using a revised mesh structure, chimney design, improved fibre processing, and heat-resistant materials. Its current official store also states that COREX 3.0 pods may last slightly longer than earlier versions.
Publishing note: Do not label every XROS pod as COREX 3.0 unless the physical package confirms it. Existing UAE inventory may include original mesh, COREX, COREX 2.0, and COREX 3.0 batches.
Leak-Resistant Pod Construction
The XROS cartridge uses Vaporesso’s leak-resistant structure with a sealed coil chamber, magnetic connection, and transparent PCTG body. Vaporesso describes the pod as using a multi-layer leak-resistant design intended to reduce condensation and e-liquid escape during normal use.
To reduce leaking:
- Do not overfill the pod.
- Keep e-liquid out of the centre airflow channel.
- Close the filling seal securely.
- Keep the pod upright when possible.
- Avoid leaving it inside a hot vehicle.
- Wipe condensation from the pod contacts.
- Replace cracked or damaged cartridges.
- Use an e-liquid suitable for the selected resistance.
No refillable pod can be guaranteed to remain completely leak-free under every temperature, pressure, filling, and storage condition.
How to Fill a Vaporesso XROS Pod
Filling a Top-Fill XROS Pod
- Remove the mouthpiece from the top of the cartridge.
- Identify the filling port.
- Keep the e-liquid nozzle away from the centre airflow opening.
- Fill the pod slowly.
- Leave a small air gap rather than filling beyond capacity.
- Reattach the mouthpiece securely.
- Allow a new pod to rest before vaping.
Filling a Side-Fill XROS Pod
- Remove the pod from the XROS device.
- Open the silicone filling plug.
- Insert the e-liquid nozzle into the filling port.
- Fill slowly without exceeding the pod capacity.
- Close the silicone seal completely.
- Wipe away any spilled liquid.
- Reinstall the pod using the magnetic connection.
- Wait before using a newly filled cartridge.
Allowing the cotton to absorb the e-liquid before first use reduces the risk of damaging the integrated coil.
How Long Does an XROS Replacement Pod Last?
Vaporesso’s official store estimates approximately six to eight refills, or around one to two weeks, for a typical XROS pod. Actual pod lifespan depends heavily on the selected e-liquid, resistance, power, sweetness, puff frequency, and filling habits.
A pod may last for less time when used with:
- Very sweet e-liquid
- Dark or heavily flavoured liquid
- Excessive power
- Repeated back-to-back puffs
- Insufficient liquid
- Long inhalations
- Incorrect VG/PG ratios
A clean, moderate e-liquid and correct device output may help the cartridge remain usable for more refills.
When Should You Replace an XROS Pod?
Replace the cartridge when you notice:
- A permanent burnt taste
- Significant flavour reduction
- Unusual gurgling that does not stop
- Persistent leaking
- Reduced vapour production
- A cracked pod body
- A damaged filling seal
- Darkened cotton or heavily discoloured liquid
- The device repeatedly failing to detect the pod
The integrated coil cannot be removed from the cartridge. When the coil reaches the end of its usable life, replace the complete pod.
Who Are Vaporesso XROS Replacement Pods For?
XROS replacement pods may suit adult users who:
- Already own a Vaporesso XROS device
- Want an integrated coil and cartridge
- Prefer refillable pods
- Want several resistance choices
- Use MTL or restricted DTL vaping
- Want top-fill or side-fill options
- Prefer magnetic pod installation
- Want to change flavours without replacing the battery device
They are not suitable for non-XROS Vaporesso kits or devices from unrelated brands.
Frequently Asked Questions
How many XROS pods are included in one pack?
A standard Vaporesso XROS replacement-pod pack contains four cartridges of the same resistance and capacity. Check the selected variant before ordering because retailers may also sell individual pods or differently packaged stock.
Do Vaporesso XROS replacement pods contain e-liquid?
No. Standard XROS replacement pods are supplied empty. E-liquid and the XROS battery device must be purchased separately.
Are all XROS pods compatible with every XROS device?
Vaporesso describes the XROS pod family as sharing broad backward compatibility. However, the ideal resistance depends on the device’s available output. The 0.4Ω pod is intended for higher-output XROS models, while 0.6Ω to 1.2Ω options have broader practical support across earlier devices.
Which XROS pod is best for nicotine salt?
The 0.8Ω, 1.0Ω, and 1.2Ω pods are commonly selected for nicotine salt e-liquid because they produce a controlled MTL draw. Nicotine strength should be matched to the vapour output and personal tolerance. Higher-strength liquid should not normally be paired with the high-output 0.4Ω pod.
Which XROS pod produces the most vapour?
The 0.4Ω mesh pod produces the warmest and fullest vapour in the standard XROS range. Vaporesso lists an ideal output of approximately 25W.
Which XROS pod provides the tightest draw?
The 1.2Ω pod provides the tightest, lowest-output MTL experience. The 1.0Ω pod is another suitable option for users who prefer a restricted inhale.
Can an XROS pod be refilled?
Yes. XROS replacement pods are refillable. The coil is integrated into the cartridge, so the pod can be refilled several times but the coil itself cannot be replaced separately.
Why does my new XROS pod taste burnt?
A new pod may taste burnt if it is used before the internal cotton has absorbed enough e-liquid. Fill the cartridge and allow it to rest before use. Also check that the selected power is suitable for the resistance.
What is the difference between 2ml and 3ml XROS pods?
The 3ml pod holds 50% more e-liquid than the 2ml version, reducing the frequency of refilling. The 2ml version provides the same compact cartridge format and may be required in markets with capacity restrictions.
Buy Vaporesso XROS Replacement Pods in the UAE
Choose the correct Vaporesso XROS Replacement Pod resistance, capacity, filling system, and COREX generation for your device. Each standard pack contains four refillable cartridges with integrated coils.
Order online for delivery across Dubai and the UAE according to current store stock and delivery terms. Check the resistance, capacity, filling style, package seal, and compatibility before opening the pack.
For adults aged 18 and over only. Replacement pods are supplied empty and contain no nicotine. E-liquids used with these pods may contain nicotine. Nicotine is an addictive substance. Keep pods, devices, and e-liquids away from children and pets.
